iSmartGate USB to Ethernet Adaptor
USB to Ethernet Adaptor for a wired connection between your iSmartGate device and your home router or access point. Ideal for locations with too many Wi-Fi devices, where the Wi-Fi signal is not reliable or doesn't reach the desired installation location. This accessory connects to the iSmartGate device using the USB port and to an Ethernet cable (RJ45) using the Ethernet port.
Netatmo Rain Gauge
By adding the Rain Gauge to your Netatmo Personal Weather Station you will be able to track the amount of rainfall per hour or over a longer stretch (historical data is stored free). You will also be able to set up notification that will notify you when the sensor registers rainfall.
Netatmo Wind Gauge
Designed to work with the Netatmo Personal Weather Station. The first ultrasound wind gauge of its type: the 4 ultrasonic transducers provide ultra-accurate measurements for wind speed and direction.
Netatmo Mount for Rain or Wind Gauge
Mount for Netatmo Rain Gauge and Wind Gauge. The Netatmo mount makes it easier to attach your Rain / Wind Gauge to a wall, roof, pole or railing.
Nanoleaf Essentials 1m Lightstrip Extension
Extend your Nanoleaf Essentials Lightstrip with this 1 metre extension. You can increase up to 10 m with one Controller. Requires a Nanoleaf Essentials Lightstrip Starter Kit.
Nanoleaf Lines 60 Degrees Expansion Pack (3 Lines)
Unleash your creativity to the fullest and grow your Nanoleaf Lines setup with this Expansion Pack which includes 3 Lines and mounting supplies. Nanoleaf Lines are modular backlit LED bars that combine smart technology with design freedom.
Nanoleaf Elements Starter Kit (7 Pack)
Nanoleaf Elements bring together smart technology and bespoke lighting for a natural harmony of both worlds. Customisable modular panels finished with a wood grain veneer add an elegant and organic feel to your home. Beautiful both on and off, the textured panels create geometric wall art that illuminates with a dynamic glow to softly fill your space.
Nanoleaf Elements Expansion Pack (3 Pack)
Grow your Nanoleaf Elements masterpiece with additional panels. Each Expansion Pack includes 3 panels and mounting supplies. Connect up to 21 panels with one power supply, and up to 80 panels with one Controller.
Nanoleaf Shapes – Hexagons Expansion Pack (3 Panels)
Level up your design by adding panels with the Nanoleaf Shapes Hexagon Expansion 3 Pack. Also available in Triangles and Mini Triangles Expansion Packs — mix and match any panel shape from the Nanoleaf Shapes Starter Kits (Triangles, Mini Triangles or Hexagons) range for the ultimate in creativity.
Nanoleaf Shapes – Mini Triangles Expansion Pack (10 Panels)
Level up your design by adding panels with the Nanoleaf Shapes Mini Triangles Expansion 10 Pack. Also available in Hexagons and Triangles Expansion Packs — mix and match any panel shape from the Nanoleaf Shapes Starter Kits (Triangles, Mini Triangles or Hexagons) range for the ultimate in creativity.
Nanoleaf Shapes – Triangles Expansion Pack (3 Panels)
Level up your design by adding panels with the Nanoleaf Shapes Triangles Expansion 3 Pack. Also available in Hexagons and Mini Triangles Expansion Packs — mix and match any panel shape from the Nanoleaf Shapes Starter Kits (Triangles, Mini Triangles or Hexagons) range for the ultimate in creativity.
Shelly 1 Wi-Fi Relay Switch
Control a wide range of home appliances and office equipment (lights, power lines, garage doors, curtains, security systems, heating radiators, air conditioners, etc.) from anywhere with the smallest Wi-Fi operated relay switch.
Discontinued. Replaced by the Shelly 1 Plus.
Shelly Bypass
A Shelly Bypass is usually required for both the Shelly 1L and Shelly Dimmer 2 where there is no neutral wire at the wall switch and the power consumption of the attached load is less than 20 watts. In some cases, the Shelly Dimmer 2 may also need this Bypass to stop LED lights "flickering" at low dimming levels for LED lighting with a combined wattage of less then 50W.
Shelly EM Energy Meter 50A or 120A Clamp
Addition energy meter clamps for Shelly EM Energy Meter - available in 50A and 120A ratings.
Global Cache iTach Flex IP
Global Cache iTach Flex WiFi
Global Cache iTach Flex Tri-Port
The Global Cache Tri-Port cable is designed to expand the Global Port on the iTach Flex IP or iTach Flex WiFi to allow for up to three iTach Emitters or two iTach Emitters and one iTach Blaster cable to be used at the same time.
Global Cache iTach Flex IR Emitter
The Global Cache Flex Link IR Emitter connects to your iTach Flex IP or iTach Flex WiFi via the 3.5mm jack to enable control for infra-red (IR) components.