Shelly Plus 1PM is a small form factor smart switch with power measurement, which allows remote control of electric appliances through a mobile phone, tablet, PC, or home automation system. It can work standalone in a local Wi-Fi network or it can also be operated through cloud home automation services.
Shelly Plus 1PM can be accessed, controlled and monitored remotely from any place where the User has internet connectivity, as long as the device is connected to a Wi-Fi router and the Internet.
It can be retrofitted into standard electrical wall boxes, behind power sockets and light switches or other places with limited space.
Shelly Plus 1PM has embedded Web Interface which can be used to monitor and control the device, as well as adjust its settings.
Supported load types
- Resistive (incandescent bulbs, heating devices)
- Capacitive (capacitor banks, electronic equipment, motor start capacitors)
- Inductive with RC Snubber (LED light drivers, transformers, fans, refrigerators, air-conditioners)
Simplified internal schematics
Wiring legend
| Terminals | Description |
|---|---|
| I | Load circuit input terminal |
| 0 | Load circuit output terminal |
| SW | Switch (controlling O) input terminal |
| L | Live (110-240 V) terminal |
| N | Neutral terminal |
| + | 24 - 30 VDC positive terminal |
| êž± | 24 - 30 VDC ground terminal |
Basic wiring diagrams
IMPORTANT – All 240V electrical work and installations in Australia must be performed by a licensed electrician. The wiring diagrams below are for informational purposes only.
Advanced wiring diagrams
IMPORTANT – All 240V electrical work and installations in Australia must be performed by a licensed electrician. The wiring diagrams below are for informational purposes only.
Troubleshooting
Press and hold the button on the back of the Shelly 1PM Plus for 10 seconds to factory reset the device.
Please make sure that you are running the latest firmware and try turning on the Shelly Cloud connection through the web interface.
Make sure you are not using the L and N device terminals as bridges. Using them as bridges doubles the current through them which leads to overheating. Using the terminals as bridges in only available with low currents, so that the total current does not exceed 16A.
Â
Make sure the ambient temperature does not exceed 40 °C / 105 °F. If placed in confined space Shelly Plus 1PM may increase the ambient temperature above the allowed limits. Ensure ventilation of the Device.
Specifications
Power |
|
| Power supply AC: | 110-230V ±10%, 50/60Hz |
| Power supply DC: | 24 – 30V |
| Maximum load: | 16A |
| Device power consumption: | < 1 W |
Special functions |
|
| Dry contacts: | No |
| Roller shutter mode: | No |
| Device temperature protection: | Yes |
| Overload protection: | Yes |
| Power measurement: | Yes |
| Working without a neutral wire: | No |
Features |
|
| Control channels: | 1 On/Off Relay Channel |
| Operational temperature: | 0°C to + 40°C |
| Intelligent On/Off: | Yes |
| Local and smart control: | Yes |
| Sunrise/Sunset timer: | Yes |
| Built-in weekly scheduler: | Yes |
Connectivity |
|
| Wi-Fi protocol: | 802.11 b/g/n |
| Radio frequency: | 2400 – 2500 MHz |
| Radio signal power: | 1mW |
| Wireless range: | up to 50 m outdoors and up to 30 m indoors (depending on the building materials) |
| Bluetooth: | Yes |
Dimensions |
|
| Size: | 41mm x 36mm x 16mm |
